Utility Poles & Aerial Electrical Cables

Pole to pole or building to pole, we can get the work done quick for you. Aerial electrical services, cabling installations and guy-wire supporting. From high voltage to LV communication we are the utility pole experts. Ask us about utility company requirements and local utility pole codes.

Utility poles are divided into ten classes, from 1 to 10. The classes’ definition specifies a minimum circumference that depends on the species of tree and the length of the pole. This circumference is measured 6 feet from the butt of the pole. There is also a minimum top circumference that is the same for all species and lengths. Class 1 pole has a minimum top circumference of 27 inches. If it is 25 feet long and cedar (most utility poles are cedar), the circumference measured 6 feet from the bottom must be at least 43.5 inches. The higher the class number, the skinnier the pole. Pole lengths start at 16 feet and increase by 2-foot steps to 22 feet, then by fives from 25 feet to 90 feet. A 90-foot class 1 western red cedar pole weighs about 6,600 pounds. A 16-foot pole weighs only about 700. A 35-foot pole is a typical length used in cities to carry one or two crossarms. Poles are spaced about 100 feet to 150 feet apart, with 125 feet being typical.

We are installers for privately owned utility poles and all the aerial cables associated with them. Commercial property, driveway or backyard, we furnish and install wooden poles for every type of circumstance. Replacements for aging or storm damaged utility poles. We are contractors for pole lights, CCA utility poles, sports lighting poles and poles for parking lot lighting. Privately Owned Utility Poles, aerial cables, signage poles, aerial work, high reach – bucket truck services for every situation. Aerial, tri-plex and LED lighting fixtures. We are contractors for 50 miles surrounding the City of Philadelphia, PA.